-
C17510 Class 3 Beryllium Copper Alloys
Class 3 C17510 is specifically recommended for projection welding dies, flash and butt welding dies, current carrying shafts, and bushings. Since they have higher strength than Class 2, C17510 is recommended for highly stressed welder structural current carrying members and heavy duty offset electrode holders.
Class 3 C17510 is generally recommended for spot welding and seam welding steels, such as stainless steel, since it has high electrical resistance. The C17510 Alloy is heat treatable.
The most common uses for C17510 are in those applications that need a lot of conductivity of temperature or electricity. Its ultimate tensile strength is 140 ksi while its hardness is RB 100. The conductivity of C17510 is about 45-60% of regular copper.
-
C17510 Beryllium Copper Round Bar (CuNi2Be) | Spot welding electrode arm
C17510 Beryllium Copper offers a high performance material that provides a unique combination of relatively high electrical and thermal conductivity and high stregnth. Class III Beryllium Copper is a heat treatable copper alloy with a high tensile stregnth. C17510 is utilized when a combination of very good mechanical stregnth along with moderate electrical and thermal conductivity is required. The hardness properties of C17510 Beryllium Copper are comparable to tool steel.
-
C17510 CuNi2Be | Electrode holder rod
C17510 Beryllium Copper Welding processes such as brazing, soldering, gas shielded arc welding, butt welding, seam welding, coated metal arc welding, and spot welding are recommended for C17510 copper alloy. Oxyacetylene welding is not recommended for this alloy. C17510 copper alloys can be hot worked between 648 and 885 degrees Celsius.
C17510 beryllium copper alloys are highly preferred because they offer corrosion resistance, and its copper properties are high performance and high strength.
-
CuBeNi bar rod Beryllium copper uns c17510 | New energy Battery detection probe
C17510 Beryllium Copper Alloy, also known as alloy 3, gets its strength from precipitation heat treating. The grade of the C17510 material has a very high yield-strength-to-conductivity ratio and is good for moderate stress applications where galling is a concern. C17510 is used mainly in aerospace and plastic mold tooling industries, this product is ideal for small electronic connector and mold tooling applications including pylon bushings for large turbine engines, conductors, relay parts, and roll pins.
-
CuNi2Be – Beryllium nickel copper rod bar c17510 | New energy high current needle
CuNi2Be—C17510 (CDA 1751) Nickel Beryllium Copper is the mirror image of alloys C17500 in terms of its properties & Characteristics. C17510 is also primarily utilized in the industry applications that require most highly thermal or electrical conductivity, which features a Nickel alloying addition (1.40-2.20%). C17510 also offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively.
-
Application of C17510 in Spot Welidng Machines
C17510 or beryllium nickel copper UNS C17510 is a high conductivity copper-beryllium alloy used in applications requiring a combination of high thermal conductivity with moderate strength. supplied with certified mechanical properties, is fully heat-treated, and no additional treatment is needed.is nonmagnetic and provides excellent resistance to thermal fatigue.
-
C17510 Beryllium Nickel Plate rod – automobiles ships large mechanical welding equipment
A bronze with beryllium as the main alloy component and without tin. It contains 1.7-2.5% beryllium and a small amount of nickel, chromium, titanium and other elements. After quenching and aging treatment, the strength limit can reach 1250-1500MPa, which is close to the level of medium-strength steel. In the quenched state, the plasticity is very good and can be processed into various semi-finished products. Beryllium bronze has high hardness, elastic limit, fatigue limit and wear resistance. It also has good corrosion resistance, thermal conductivity and electrical conductivity. It does not produce sparks when impacted. It is widely used as important elastic components and wear-resistant parts. And explosion-proof tools, etc.
Applied to Welding arms, welding guns and spot welding materials on large mechanical welding equipment such as automobiles and ships
-
Beryllium Nickel Copper UNS C17510 – Welding arms, welding guns
Applied to Welding arms, welding guns and spot welding materials on large mechanical welding equipment such as automobiles and ships
C17510 or beryllium nickel copper UNS C17510 is a high conductivity copper-beryllium alloy used in applications requiring a combination of high thermal conductivity with moderate strength. supplied with certified mechanical properties, is fully heat-treated, and no additional treatment is needed.is nonmagnetic and provides excellent resistance to thermal fatigue.
-
Copper Nickel Beryllium Alloy (C17510) (CuNi2Be) New energy vehicle battery detection pin
Copper Nickel Breyllium Alloy is heat-treatable with moderate electrical and thermal conductivity and high tensile strength.
Applied to New energy vehicle battery detection pin, probe, current pin, electronic component pin
It is recommended for projection welding dies, flash and butt welding dies, current-carrying members, and heavy-duty offset electrode holders. It is also generally recommended for spot and steam welding steels with high electrical resistance, such as stainless steel.
-
C17510 Beryllium Nickel Copper( CuNi2Be)
CuNi2Be or beryllium nickel copper UNS C17510 is a high conductivity copper-beryllium alloy used in applications requiring a combination of high thermal conductivity with moderate strength. CuNi2Be, supplied with certified mechanical properties, is fully heat-treated, and no additional treatment is needed. CuNi2Be is nonmagnetic and provides excellent resistance to thermal fatigue.